EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 125)

SCPI Command Reference
Power Meters 117
Product-Specific Commands—Description
:MMEMory[1..n]:ACQuisition
Description This command initiates a data acquisition.
Acquires data at the selected sampling rate. The
acquisition will be saved to the system hard disk
in the file : <filename to specified>
The acquisition will continue for the duration
specified in the MMEM:ACQ:DUR command.
Syntax :MMEMory[1..n]:ACQuisition<wsp><StartStop>
,CONT
Parameter(s)
³
StartStop:
The program data syntax for <StartStop> is
defined as a <Boolean Program Data> element.
The <StartStop> special forms ON and OFF are
accepted on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
This parameter allows to change the state of an
acquisition:
0 or OFF - Stops the acquisition.
1 or ON - Starts the acquisition.
³
AcqType:
The program data syntax for the second
parameter is defined as a <CHARACTER
PROGRAM DATA> element. The allowed
<CHARACTER PROGRAM DATA> element for
this parameter is CONT.