EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 148)

SCPI Command Reference
140 IQS-1100/IQS-1500
Product-Specific Commands—Description
:SENSe[1..n]:POWer[:DC]:REFerence:
DISPlay
Description This command performs a new reference
measurement and changes the display to show
relative power (dB or W/W) for the specified
channel.
Syntax :SENSe[1..n]:POWer[:DC]:REFerence:DISPlay
Parameter(s) None
Example(s) SENS:POW:REF:DISP
SENS:POW:REF?
Notes This command is not executed if a data
acquisition is in progress. In that case, the
"Acquisition in progress" message will be
returned.
See Also SENSe:POWer:[DC]:REFerence?
SENSe:POWer:[DC]:REFerence:ALL
SENSe:POWer:[DC]:REFerence:STATe
SENSe:POWer:[DC]:REFerence:STATe?