EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 120)

SCPI Command Reference
112 IQS-1100/IQS-1500
Product-Specific Commands—Description
:FORMat[1..n][:DATA]
Description This command changes the resolution of the
power value when dB or dBm is selected for the
specified channel.
Syntax :FORMat[1..n][:DATA]<wsp><FormatData>
Parameter(s) FormatData:
The program data syntax for <FormatData> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element.
Changes the data format.
The <FormatData> parameter can be :
0 -Zero digit after the decimal point
1 -One digit after the decimal point
2 -Two digit after the decimal point
3 -Three digit after the decimal point
4 -Four digit after the decimal point
5 -Autoresolution
Example(s) FORM:DATA 3
See Also FORMat[:DATA]?