Hanna Instruments HI 83749 - Manual (Page 3)

3
Please examine this product carefully. Make sure the instrument is not damaged. If any damage
has occurred during the shipment, please notify your dealer.
This HI 83749 Turbidity & Bentocheck Meter is supplied complete with:
• Six Sample Cuvets and Caps
• Four Calibration Cuvets (HI 83749-11)
• Bentocheck Reagent (HI 83749-0) and Silicone Oil (HI 93703-58)
• One 1000 µL Automatic Pipette with two Tips and Instructions Sheet
• Four 25 mL Glass Vials with Caps
• One 1 mL Syringe with two Tips; one Funnel; Filter Paper (25 pieces).
• Five Tag Holders with Tags (HI 920005)
• Tissue for wiping the cuvets
• Four 1,5V AA Batteries
• AC Adapter
• Instruction Manual
• Instrument Quality Certificate
• Rigid carrying case
Note:Save all packing material until you are sure that the instrument works correctly. Any
defective item must be returned in the original packing with the supplied accessories.
PRELIMINARY EXAMINATION
38
To fully use the instrument tag identification system function, the measured data has to be
downloaded to a computer. The instrument can use RS232 or USB connection to communicate
with the PC.
When using the RS232 protocol, simply connect a HI 920011 serial cable between the instrument
and the computer.
To use the USB protocol, simply connect a regular USB cable between instrument and PC.
In both cases, the PC must run the HI 92000 application for successful data transfer.
PC INTERFACE
Recommendations for Users
Before using these products, make sure that
they are entirely suitable for your specific
application and for the environment in which
they are used.
Operation of these instruments may cause
unacceptable interferences to other electronic
equipments, this requiring the operator to take
all necessary steps to correct interferences.
Any variation introduced by the user to the
supplied equipment may degrade the
instruments' EMC performance.
To avoid damages or burns, do not put the
instrument in microwave ovens. For yours and
the instrument safety do not use or store the
instrument in hazardous environments.
CE DECLARATION OF CONFORMITY