Opening the device, 2 opening the device – Datalogic Scanning Connection Box C-BOX 150 User Manual
Page 12
Advertising
C-BOX 150
2
2.2 OPENING THE DEVICE
To install the C-BOX 150 or during normal maintenance, it is necessary to open it by
unscrewing the four cover screws:
CAUTION
The C-BOX 150 must be disconnected from the power supply
during this operation.
Figure 2 - Opening the C-BOX 150
It is possible to perform the following operations:
•
Proceed with the cable connections (see paragraph 2.4.2).
•
Mount the C-BOX 150 to a wall or panel.
4
Advertising