Datalogic Scanning Connection Box C-BOX 150 - Manual (Page 26)

C-BOX 150
2
2.5.2 LED Indicators
Warning (red) Pow n) er on (gree Power polarity error
(red)
TX
(green)
Status
(yellow)
Figure 16 - LED Indicators
The internal LEDs of the C-BOX 150 (see Figure above) indicate the following:
POWER ON ( PWR ) (green) indicates the C-BOX 150 is connected to the
power supply and the power switch is ON.
POWER POLARITY ERROR (red) indicates a wrong polarity. While activated, all other
LEDs will be off until the power feed is connected with
correct polarity.
WARNING ( WL ) (red) indicates a warning or error condition.
Off: the C-BOX 150 has terminated the Connection and/or
the Update phase; all the operations have been executed
successfully.
ON: during a connection procedure and/or the Update
phase (the system is busy) or during the C-BOX 150
Configuration Mode.
It flashes quickly when a GET command has been preset
at power on.
18