Datalogic Scanning Connection Box C-BOX 150 - Manual (Page 30)

C-BOX 150
2
2.6.3 6000, 8000 Family Scanners
For the 6000 and 8000 scanner families, the C-BOX 150 can operate in both point-to-
point single scanner configuration layouts, and in a network cluster of scanners in
Master/Slave layouts.
Master Slave 2 Slave1
C-BOX 150
BTK-6000
CAB-610X CAB-610X
CAB-60XX
PS
Encoder CAB-610X
Host
CAB-610X CAB-610X
CAB-63XX
BTK-6000
Slave 5 Slave 4 Slave 3
PWR-240
CAB-63XX
Figure 19 – Typical Lonworks scanner Layout
NOTE
In a Master/Slave layout with a great number of Slaves, a Power
Supply Unit can be connected to the scanners and the C-BOX 150
can accept the scanner power by setting the Power Source Jumper
in the right position. See paragraph 2.4.6
C-BOX 150 can perform Backup/Restore of a whole cluster under the following
conditions:
• the Master/Slave network is composed of one master and up to 9
Slaves maximum
• the Master/Slave network must be either Synchronized or Multidata
• the A.S.R. mode must be disabled
22