Datalogic Scanning Connection Box C-BOX 150 - Manual (Page 31)

INSTALLATION
2
In order to perform Backup/Restore of Master only, the C-BOX 150 Cluster
GET/SEND parameter must be configured to "Master only", see the WinHost Help
On-Line.
2.7 SCANNER REPLACEMENT
If you have to replace the scanner with another one:
1. Switch-off the system.
2. Connect the new scanner.
3. Switch-on the system.
4. Wait until the Warning Led (WL, red) is switched Off.
Now the new scanner has been automatically (default) updated with the correct
configuration!
23