Labconco FilterMatPortable Exhausters 3970024 - Manual (Page 37)

33
Chapter 5: Maintaining Your FilterMate
Product Service 1-800-522-7658
glove inside out. Double seal this glove and cut off the
glove with the contaminated bag stub inside.
8. Carefully install the new HEPA filter and uniformly tighten
the two filter clamp bolts until the HEPA filter gasket is
compressed 50%.
9. Carefully fold and roll the new bag in four-inch pleats and
push the bag into the access port. Turn the FilterMate ON
to draw a vacuum on the bag. Reinstall the rear cover
panel to protect the bag.
Figure 5-1
Bag-In/Bag-Out HEPA Filter changing procedure
Use for
Steps 6-9
Use for
Steps 1-5