Installing ceiling enclosures above the fume hood, Installing rear panels behind the fume hood – Labconco Protector Stainless Steel Radioisotope Laboratory Fume Hoods 9682200 User Manual
Page 44
Advertising
![background image](/manuals/738685/44/background.png)
40
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector Radioisotope Fume Hood
Installing Ceiling
Enclosures above the Fume
Hood
The Protector Radioisotope Fume Hood has mounting
holes to accept a ceiling enclosure to close off the area
between the top of the hood and the ceiling. Contact
Labconco Customer Service for ordering information.
Figure 7-1
Installing Rear Panels
Behind the Fume Hood
The Protector Radioisotope Fume Hood can be
modified to add a rear panel behind the fume hood
when the fume hood is placed on an island. Contact
Labconco Customer Service for ordering information.
Advertising
This manual is related to the following products: