Labconco Protector Stainless Steel Radioisotope Laboratory Fume Hoods 9682200 - Manual (Page 54)

50
Product Service 1-800-522-7658
Appendix A: Protector Radioisotope Hood Components
Item Quantity Part No. Description
8A 1 9721901 Lamp, Fluorescent (T8 x 3') – use on 4' & 8' Hoods
8B 1 9721900 Lamp, Fluorescent (T8 x 4') – use on 5' & 6' Hoods
10A 1 1302300 Switch, Rocker
10B 1 1327500 Switch, Plug (Fills cutout when switch is not used)
11A 1 9818400 Access Cover
11B 1 9825100 Label, Access Cover (includes all three corner labels)
12A 1 9810800 Side Panel, 24" internal deep hoods – NOT SHOWN
12B 1 9810801 Side Panel, 30" internal deep hoods – NOT SHOWN
12C 1 9810802 Side Panel, 36" internal deep hoods – NOT SHOWN
12D 4 1916400 Nut, Retainer #10-24 – NOT SHOWN
12E 4 1885512 Screw, Machine #10-24 x .75 Truss Head Stainless – NOT SHOWN
13A 1 9860000 Air Foil 4'
13B 1 9860001 Air Foil 5'
13C 1 9860002 Air Foil 6'
13D 1 9860003 Air Foil 8'
14 4 1861400 Pulley, Front or Rear, 1-3/16 Dia. – NOT SHOWN
15 2 4949902 Cable, Sash 130" – NOT SHOWN
16 2 9741900 Sheave, (Rear 8') – NOT SHOWN
17 2 1663200 Bumper, Rubber – NOT SHOWN (upper sash bumper)
18 4 9742100 Bronze Bearing, Flanged Rear – NOT SHOWN
19 4 1920100 Clamp, Cable Replacement – NOT SHOWN
20 2 1972100 S-Hook – NOT SHOWN (to attach weight to cable)
21A 1 99463XX Wiring Harness, Main
22 1 9807600, 01,
02, 03
Front Panel, 4', 5', 6', 8'
23 1 9724500 Sash Stop Kit