Luxul XBR-2300 - Manual (Page 13)

13
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
„
WAN IP: IP address obtained from ISP (Dynamic only) or the Static address
assigned by the ISP
„
Subnet Mask: The subnet mask obtained from ISP (Dynamic only) or the Static
Subnet Mask assigned by the ISP
„
Gateway: The gateway obtained from ISP (Dynamic only) or the Static Gateway
assigned by the ISP
„
DNS: The DNS server obtained from ISP (Dynamic only) or the Static DNS server
assigned by the ISP
„
Alternate DNS: Alternate DNS server obtained from ISP (Dynamic only) or the
Static Alternate DNS server assigned by the ISP
„
WAN MAC Address: Displays the WAN MAC Address
WAN Port Traffic: Indicates the current bandwidth being used (units are KB/s)
5.2.3 LAN
Displays the XBR-2300’s IP Address, Subnet Mask, LAN MAC Address, DHCP Server
status and NAT/NAT Entries.
„
IP Address: Displays the IP address assigned to the XBR-2300. This address will be the
Gateway of all other devices on the network.
„
Subnet Mask: Displays the subnet mask assigned to the XBR-2300
„
LAN MAC Address: Displays the LAN MAC address assigned to the XBR-2300
„
DHCP Server: Displays the status of the DHCP server (Enabled or Disabled)
„
NAT/NAT Entry: Displays the status of NAT (Enabled or Disabled) and the current
number of NAT entries in use.
5.2.4 System
Displays the status of the XBR-2300s’ CPU Usage, Memory Usage, Uptime, System
time, number of Connected Clients, Firmware Version, Bootcore Version and
Hardware Version.