Xbr-2300, Ip address: specifies the ip address to be bound – Luxul XBR-2300 User Manual

Page 38

Advertising
background image

38

XBR-2300

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XBR-2300 Vers: 07314

5.5.5.1 IP-MAC Binding
This function Binds a specified MAC address to a specified IP Address. This is useful in
networks where a device IP and the MAC address must remain linked (i.e. VoIP Phones,
Servers, Secondary Routers, etc.)

„

Enable IP-MAC Binding: Enables IP-MAC Binding function

„

Mode: There are two optional modes: Normal Mode or Mandatory Mode

w

Normal Mode: Blocks any IP Address that does not match the bound
MAC Address. IP Addresses not included in the binding list will
communicate normally

w

Mandatory Mode: Only IP Addresses matching the MAC addresses on the Binding
List are allowed to access the Internet. All addresses not included
in the list are blocked.

„

ARP List: Displays the corresponding IP and MAC addresses in the ARP Table. Select
Connected Clients in ARP List to manually add IP and MAC addresses.

„

IP Address: Specifies the IP address to be Bound.

„

MAC Address: MAC addresses to be Bound

NOTE: Once binding is enabled, the device can only access the internet

when the IP and MAC addresses on the binding list match

Remark: Name of Binding rule

Advertising