Luxul XBR-2300 - Manual (Page 29)

29
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
NOTE: Some ports are linked to a Protocol (i.e. HTTP, FTP, SMTP, etc) For a list
of Ports and corresponding Protocols see http://en.wikipedia.org/
wiki/List_of_TCP_and_UDP_port_numbers )
Type: Select TCP, UDP or All to block the corresponding traffic
NOTE: The configured Client Filter will only affect the devices in the range
of the specified IP Group during the schedule you have selected. All
other traffic will be allowed to pass.
Example: If you do not want the computers with IP addresses of 192.168.0.20 to
192.168.0.30 (IP Group=test) to visit HTTP websites from 06:00-19:00 (Schedule=ttest)
Monday through Friday, you would set the Client Filter rule as follows:
This is what the created Rule will look like after clicking on “Save”
5.4.4 URL Filter
To control visits to websites with a particular phrase or name in the URL, a URL Filter
Rule can be created.