Xbr-2300, Ip address: the ip address assigned by your isp, Subnet mask: the subnet mask assigned by your isp – Luxul XBR-2300 User Manual

Page 18

Advertising

XBR-2300

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XBR-2300 Vers: 07314

IP Address: The IP Address assigned by your ISP.

Subnet Mask: The Subnet Mask assigned by your ISP.

Default Gateway: The Default Gateway assigned by your ISP.

Upstream/Downstream Bandwidth: The PPTP upstream/downstream bandwidth
for WAN1. If not sure of your Bandwidths, contact your ISP.

MTU: MTU (Maximum Transmission Unit). System default is Auto.

MPPE: Enables support for Microsoft’s MPPE stateful encryption.

NOTE: For DSL connections we recommend Manual with a value of 1464.

Improper MTU configuration may lead to poor network performance.

NOTE: If you experience moderate to high packet loss, do not enable

this function.

L2TP: If the ISP connection is L2TP, you will need to input the following parameters
provided by your ISP. L2TP can be Dynamic or Static:

L2TP Server IP Address: IP Address of your ISPs L2TP server. If not sure of your PPTP
Server IP, contact your ISP.

User Name: Enter your L2TP User Name. If not sure of your User Name,
contact your ISP.

L2TP Password: L2TP password provided by your ISP. If not sure of your Password,
contact your ISP.

Address Mode: There are two modes available:

•

Dynamic IP: With Dynamic, the IP Address, Subnet Mask and Default Gateway
will be automatically configured for you.

•

Static IP: With Static IP, your ISP will need to provide you with your IP Address,
Subnet Mask and Default Gateway. If not sure of your IP Address, Subnet Mask
and Default Gateway, contact your ISP.

NOTE: When the IP Mode is set to Dynamic, no configuration is needed for

the IP Address, Subnet Mask and Default Gateway.