Luxul XBR-2300 - Manual (Page 24)

24
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
5.3.8.2 WAN Access Control
By default, only LAN users can access the Web Interface portal. This function will en-
able remote access and control of the XBR-2300.
„
Enable: Allows access to the Web Interface via a WAN port
„
IP Address: Enter the IP address of the remote device allowed to access the Web
interface.
NOTE: If you use the default of 0.0.0.0 all devices can connect.
„
Port: This setting will configure a port number to provide more security. The default
port is 8080.
NOTE: WAN-based Access Control to the XBR-2300 can be modified
according to your needs. All WAN devices can access the XBR-2300
at the default Access Control IP Address: 0.0.0.0. If the default Access
Control IP Address is changed (for example; 58.60.111.221), then only
the specified client device (say 58.60.111.221) will be allowed access to
the management portal. So, if the WAN1 IP address is 58.251.88.90, to
access the Web portal, the following address format would be used:
http://58.251.88.90:8080 and would only function if connecting
from the client device with the IP number of 58.60.111.221.