Luxul XBR-2300 - Manual (Page 17)

17
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
PPPoE Account: Enter the PPPoE account name. If not sure of your Account Name,
please contact your local ISP.
w
PPPOE Password: PPPoE password provided by your ISP. If not sure of your Password,
please contact your local ISP.
w
Upstream/Downstream Bandwidth (Optional): Enter the PPPoE upstream/down-
stream bandwidth for WAN1. If not sure of your Bandwidths, please contact your ISP.
w
MTU: MTU (Maximum Transmission Unit) System default is Auto.
NOTE: For DSL connections we recommend Manual with a value of 1464.
Improper MTU configuration may lead to poor network performance.
„
PPTP: If the connection is PPTP, your ISP should provide information to set the fol-
lowing parameters. PPTP can be Dynamic or Static:
w
PPTP Server IP Address: IP Address of the ISPs PPTP server. If you are not sure of the
PPTP Server IP, contact your ISP.
w
User Name: Enter your PPTP user name. If not sure of your User Name, contact
your ISP.
w
PPTP Password: PPTP Password provided by your ISP. If not sure of your Password,
contact your ISP.
w
Address Mode: There are two modes available:
• Dynamic IP: With Dynamic, the IP Address, Subnet Mask and Default Gateway
will be automatically configured for you.
• Static IP: With Static IP, your ISP will need to provide you with your IP Address,
Subnet Mask and Default Gateway. If not sure of your IP Address, Subnet Mask
and Default Gateway, contact your ISP.
NOTE: When the IP Mode is set to Dynamic, no configuration is needed for
the IP Address, Subnet Mask and Default Gateway.