Luxul XBR-2300 - Manual (Page 31)

31
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
This is what the created Rule will look like after clicking on “Save”
5.4.5 Bandwidth/NAT
The Bandwidth/NAT section has two submenus: Bandwidth Settings and NAT Settings.
These settings allow for the control of how much Bandwidth is available to client
devices, as well as which WAN IP Address is used for NAT on a specific range of devices.
5.4.5.1 Bandwidth Settings
Bandwidth Settings allows the control of bandwidth allocated to each device on the
network. The XBR-2300 can control the bandwidth for up to 256 individual client
devices. IP address ranges are also supported.