Before you begin, Solar panel and gate activity chart – Mighty Mule MM-SL2000B User Manual

Page 13

Advertising
background image

SL-2000B Instruction Manual 04.26.12

1

Winter Ratings Watts

Zone 1

Zone 2 Zone 3

SL-2000B 10 4 8 13
SL-2000B

20 8 16 26

Dual SL-2200B

20

4

8

13

Estimated Maximum Number of Cycles Per Day

Before You Begin...

1. Determine Charging Option for Battery: Transformer OR Solar

NEVER USE TRANSFORMER AND SOLAR PANEL(S) AT THE SAME TIME.

It will damage the control board.

IMPORTANT:

• The SL-2000B 12 volt battery must be charged by either connecting the transformer (included) or

solar panel kit [FM123] to the control board.

• The transformer is designed for indoor use. If the transformer can be plugged only into an outside

electrical outlet, a weatherproof cover/housing (available at local electrical supply stores) must be

used.

• If your gate is more than 1000 ft. from an AC power source, you will need to use at least 10 watts

solar charging power to charge the battery [FM123]. Refer to the Solar Panel and Gate Activity

chart below.

• All low voltage wire used with the GTO Gate Operator must be 16 gauge dual conductor, stranded,

direct burial wire [RB509]. Do not run more than 1000 ft. of wire.

The table and map

illustrate the maximum

number of gate cycles

to expect per day in a

particular area when

using from 10 to 20

watts of solar charging

power. The figures

shown are for winter

(minimum sunlight).

Accessories connected to your system

will draw additional power from the

battery.
NOTE: A minimum of 10 watts solar

charging power is needed to charge the

batteries.

10 Watt Solar Panel [FM123]
5 Watt Solar Panel [FM122]

Solar Panel and Gate Activity Chart

Advertising