Mighty Mule MM-SL2000B - Manual (Page 28)

16
SL-2000B Instruction Manual 04.26.12
CONNECTING ACCESSORIES
The ACCESSORY terminal block is the connection point for accessories such as push buttons, safety loops,
intercoms, etc. The ACCESSORY terminal marked GRN (green) is the common ground for all accessories.
GRN is paired with the terminals shown below when connecting accessories to the control board.
IMPORTANT: Make sure to twist exposed wires tightly and insert them into the terminals without
loose strands. Tighten set screws against exposed end of wires.
Make sure the control box power switch is OFF before connecting accessories.
ON
FIRST OPERATOR ALARM ACCESSORY RCVR
SEQ1
SEQ2
LEARN
RED BLK ORG BLU GRN CLS EDG OPN EDG BLU ORG WHT GRN R B G
Photo Beams (R4222)
Push Button Control (RB101)
Vehicle Sensor (FM139)
Refer to Vehicle Sensor
manual for additional
connections.
Edge Sensor
NOTE: There may be additional connection options for
applications that are not illustrated here.
Refer to accessory manuals for details.
7
4
5
4
4
Digital Keypad (F310)
6
4
7
1 2 ABC 3 DEF
4
GHI
5
JKL
6
MNO
7 PRS
8
TUV
9
WXY
0
4 3 2 1 5 6 7