Vortech 1994-1995 Ford 5.0 Mustang - Manual (Page 2)

P/N: 4FG020-010
© 2008 Vortech Engineering, Inc.
All Rights Reserved. Intl. Copr. Secured
04NOV08 V2.0(94-95 5.0 Mus.(4FG V2.0))
ii
Proper installation of this supercharger kit requires general automotive
mechanic knowledge and experience. Please browse through each step
of this instruction manual prior to beginning the installation to determine
if you should refer the job to a professional installer/technician. Please
call Vortech Engineering for installers in your area.
FOREWORD
© 2008 VORTECH ENGINEERING, LLC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,
or translated into another language in any form, by any means without written permission
of Vortech Engineering, LLC.
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires general automotive
mechanic knowledge and experience. Please browse through each step of
this instruction manual prior to beginning the installation to determine if you
should refer the job to a professional installer/technician. Please contact
your dealer or Vortech Engineering for possible installers in your area.
2. This product was designed for use on stock (un-modified, OEM) vehicles. The
PCM (computer), engine, transmission, drive axle ratios and tire O.D. must be stock. If
the vehicle or engine has been modified in any way, check with Vortech prior to installa-
tion and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard use (no
boost) until the problem is resolved.
5. Vortech is not responsible for any clutch, transmission, drive-line or engine damage.
Exclusions from Vortech warranty coverage considerations include, but not
limited to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such as, but not lim-
ited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM program-
ming or other such changes.
STOP