Vortech 1994-1995 Ford 5.0 Mustang - Manual (Page 8)

P/N: 4FG020-010
© 2008 Vortech Engineering, Inc.
All Rights Reserved. Intl. Copr. Secured
04NOV08 V2.0(94-95 5.0 Mus.(4FG V2.0))
viii
This Page Left Intentionally Blank
SPECIAL NOTICE CONCERNING ThE
MSD IGNITION SySTEM
The MSD Boost Timing Master, manufactured by Autotronic
Controls Corporation, included in this kit is serviced exclusively
by the manufacturer. Autotronic Controls Corporation warrants
this product to be free from defects in material and workmanship
under normal use and if properly installed for a period of one
(1) year from the date of purchase. In case of malfunction,
this unit will be repaired free of charge according to the terms
of the warranty. If found to be defective as mentioned above,
it will be repaired or replaced if returned prepaid along with
proof of date of purchase. This shall constitute the sole remedy
of the purchaser and the sole liability of Autotronic Controls
Corporation and/or Vortech Engineering, LLC. To the extent
permitted by law, the foregoing is exclusive and in lieu of all
other warranties or representations whether expressed or
implied, including any implied warranty of merchantability or
fitness. In no event shall Autotronic Controls Corporation and/or
Vortech Engineering, LLC, be liable for labor charges, special
or consequential damages.
When returning this unit for service, proof of purchase must
be supplied for warranty verification. After the warranty period
has expired, repair service is charged between a minimum and
maximum charge. In either case, please send the unit pre-paid
with proof of purchase to the attention of:
Autotronic Controls Corporation
Customer Service Department
12120 Esther Lama
Suite #114
El Paso, Texas, 79936
Phone: (915) 855-7123
Fax: (915) 857-3344
www.msdignition.com
The repaired unit will be returned as soon as possible after
receipt, COD for any charges. Be sure you include a detailed
account of any problems experienced, the type of vehicle and
any modifications.
Should you have any technical or installation questions
regarding this unit, contact Vortech Engineering, LLC, directly
at (805) 247-0226.