Nexen RSD200 964531 - Manual (Page 17)

1 FORM NO. L-21161-E-0108
.0 OPeRATION
Manual control of the RSD200 OUTPUT can be
achieved by pressing the SWITCH TO MANUAL
CONTROL button on the diagnostics screen (See Figure
18 in DIAGNOSTICS section).
The Increase buttons increase the RSD200 OUTPUT
to the brake, clutch, or drive; and the Decrease buttons
decrease the RSD200 OUTPUT to the brake, clutch, or
drive. Pressing the 10% buttons will increase/decrease
the OUTPUT by 10% steps and pressing the 1% buttons
will increase/decrease the OUTPUT by 1% steps.
Manual operation can be used for troubleshooting and
stabilizing the dancer arm in order to take a measurement
or reading. Press SWITCH TO AUTOMATIC CONTROL
to return to automatic control.
.1 mANUAL CONTROL OF RSD200 OUTPUT
Figure 1