Nexen RSD200 964531 - Manual (Page 5)

 FORM NO. L-21161-E-0108
1.1 INSTALLATION
The RSD200 can be mounted horizontally or vertically near the pneumatic tension brake or clutch. Provide enough
clearance around the RSD200 to allow removal of the cover and the hold down screws.
NOTe: For best performance and reliability, locate the current or voltage to pressure converter near the brake
or clutch. Use a regulated filtered air supply (See SPeCIFICATIONS section for filter details.)
Figure 2
CAUTION
Mount the RSD200 in a shock and vibration free area with an ambient temperature of
less than 140°F [60°C] and more than 32°F [0°C].
134.4
5.29
107.8
4.24
14.1
.56
5.8
.23
11.6
.46
43.8
1.72
21.7
.86
123.19
4.850
81.41
3.205
40.39
1.590
31.4
1.24
17.3
.68
145.7
5.74
11.6
.46
27.7
1.09
6.6
.26
14.3
.56
37.6
1.48
45.0
1.77
55.4
2.18
Cable not shown
Cable Length 2 m
78 in
2x
O 6.60
.260 Mounting Holes
1.0 INSTALLATION / CONNeCTIONS
Communication Cable 1.5 m [59 in]
(Not Shown)