Lenco BTT-2 - Manual (Page 33)

33
Safety Precautions
Explanation of the symbols:
This symbol indicates that there are important operating maintenance
instructions in the user manual accompanying the device
This symbol indicates that dangerous voltage is present within this device,
constituting a risk of electronic shock or personal injury
This symbol indicates that the action in question may not be performed by a
child because there is a risk of personal injury.
CAREFULLY READ THE FOLLOWING SAFETY PRECAUTIONS BEFORE USE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN THIS DEVICE
WARNING: DO REMOVE ANY SCREWS OR OTHER COMPONENTS OF
THE DEVICE TO PREVENT THE RISK OF ELECTRIC SHOCK.
Install and use the device only as described in the user manual.
Never remove the housing of this device.
Never place this device on top of other devices.
Use only the specified accessories and attachments specified by the
manufacturer.
This device must be used in combination with a power supply as specified in the
specification table. If you are not sure of the type of power supply used in your
home, consult your power company.
Do not use loose or damaged cords and/or plugs.
This device has a Class II construction. Devices with a Class II construction can
be connected to an unearthed power outlet.
The power outlet must be located close the device and must be easily accessible.
Make sure that power outlets or extension cables are not over overloaded.
Overloading can cause short-circuits or fire.
Always pull the plug when removing it from the power outlet.
Do not pull the power cord. This may cause a short-circuit.
If you notice smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the power outlet immediately.
Disconnect the plug from the power outlet during lightning storms.
Disconnect the plug from the outlet when the device will not be used for a long
time.
Do not step on the power cord and don’t pinch the power cord.