Altera Floating-Point - Manual (Page 116)

ALTFP_CONVERT IP Core
17
2014.12.19
UG-01058 Subscribe
Send Feedback
ALTFP_CONVERT Features
The ALTFP_CONVERT IP core offers the following features:
• Conversion functions for the following formats:
• Integer-to-Float
• Float-to-Integer
• Float-to-Float
• Fixed-to-Float
• Float-to-Fixed
• Support for signed and unsigned integer
• Optional exception handling output ports such as
overflow
,
underflow
, and
nan
Table 17-1: Supported Operations and Exception Ports
Operation Supported Exception Ports
Integer-to-Float Not supported
Float-to-Integer
overflow
,
underflow
, and
nan
Float-to-Float
overflow
,
underflow
, and
nan
Fixed-to-Float Not supported
Float-to-Fixed
overflow
,
underflow
, and
nan
ALTFP_CONVERT Conversion Operations
This table lists the features of each conversion operation.
© 2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html . Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134