Altera Floating-Point - Manual (Page 14)

File Name Description
<my_ip>.svd Allows HPS System Debug tools to view the register maps of
peripherals connected to HPS within a Qsys system.
During synthesis, the .svd files for slave interfaces visible to System
Console masters are stored in the .sof file in the debug section.
System Console reads this section, which Qsys can query for register
map information. For system slaves, Qsys can access the registers by
name.
<my_ip>.v
or
<my_ip>.vhd
HDL files that instantiate each submodule or child IP core for
synthesis or simulation.
mentor/ Contains a ModelSim ® script msim_setup.tcl to set up and run a
simulation.
aldec/ Contains a Riviera-PRO script rivierapro_setup.tcl to setup and run a
simulation.
/synopsys/vcs
/synopsys/vcsmx
Contains a shell script vcs_setup.sh to set up and run a VCS ®
simulation.
Contains a shell script
vcsmx_setup.sh and synopsys_ sim.setup file to
set up and run a VCS MX ® simulation.
/cadence Contains a shell script ncsim_setup.sh and other setup files to set up
and run an NCSIM simulation.
/submodules Contains HDL files for the IP core submodule.
<child IP cores>/ For each generated child IP core directory, Qsys generates /synth and /
sim sub-directories.
Specifying IP Core Parameters and Options (Legacy Parameter Editors)
Some IP cores use a legacy version of the parameter editor for configuration and generation. Use the
following steps to configure and generate an IP variation using a legacy parameter editor.
Note: The legacy parameter editor generates a different output file structure than the latest parameter
editor. Refer to Specifying IP Core Parameters and Options for configuration of IP cores that use the
latest parameter editor.
1-8 Specifying IP Core Parameters and Options (Legacy Parameter Editors)
UG-01058
2014.12.19
Altera Corporation About Floating-Point IP Cores
Send Feedback