Subaru 2009 Impreza Navigation System - Manual (Page 110)

110 Audio and Visual
Basic operation of the Audio and Visual
Setting and adjusting the sound
Adjusting the sound volume
It is possible to adjust the sound volume while looking and listening to
the source.
NOTE
When the voice of the navigation system breaks in, the sound volume is auto-
matically reduced temporarily.
1
Rotate the [POWER/VOL] button in either direction or
press the [+][-] switches of the steering switch.
• Turning the [POWER/VOL] button counterclockwise decreases
the sound volume while turning it clockwise increases the
sound volume.
• Each time the [-] button of the steering switch is pressed, the
sound volume decreases, and each time the [+] button is
pressed, it increases.
• The volume level is displayed in figures on the upper right sec-
tion of the screen.
NOTE
For detailed setting of the sound quality and balance, refer to "Setting the audio"
on Page
158 .
Turning off the sound
It is possible to mute temporarily.
1
Press the (mute) switch of the steering switch.
Press again the (mute) switch of the steering switch or
adjust the sound volume to cancel the mute.
NOTE
• When pressing the (mute) switch while in the use of the hands-
free function, the audio sound volume turns off automatically and the follow-
ing operations are available.
• Pressing the (mute) switch while in the incoming call with the
handsfree allows you to take a phone call.
• Pressing the switch continuously for more than 0.5 seconds while in the
incoming call with the handsfree allows you to put a phone call on hold.
• While in the incoming call with the handsfree, pressing the switch continu-
ously for more than 0.5 seconds with a phone call put on hold allows you to
hang up the phone.
• For details of the sound volume adjustment, refer to "Adjusting the sound vol-
ume" on Page
110 .