Subaru 2009 Impreza Navigation System - Manual (Page 169)

Audio and Visual 169
Setting the audio
5
When "After changing settings, system may not play
back" is displayed, select
(Yes).
NOTE
The following can be conducted in this screen.
• Setting the screen (See Page 154 .)
• Setting the dynamic range (See Page 170 .)
• Setting the language (See Page 171 .)
• Setting the parental level (See Page 173 .)
Setting the screen
It is possible to make a setting to decide whether or not the angle mark
is displayed. And it is also possible to set the type of the image.
The angle mark is a mark displayed when the angle can be changed
while playing back a DVD compliant with multi-angle.
1
Select (SCREEN) in the DVD SET UP screen.
2
Make a setting to decide whether or not the angle mark
is displayed, and also set the type of the screen.
Select (ON) of the ANGLE MARK to display the angle mark.
And select (OFF) not to display the ANGLE MARK.
Select either of the following to set the type of the image.
• : The width and height of the image is displayed in the
ratio of 16:9.