Subaru 2009 Impreza Navigation System - Manual (Page 116)

116 Audio and Visual
Listening to the radio
Selecting a station
Selecting a station that is preset
Presetting a station in advance in the in-vehicle equipment allows you
to invoke that station.
1
Select the station preset on the FM radio screen or AM radio
screen, or press the
or button of the steering switch.
• When the FM radio screen or AM radio screen is not displayed,
press the button.
• Each time the or button of the steering switch is
pressed, the station preset changes over. Pressing the
button changes over the station in the descending order of the
preset number, while pressing the
button changes it over
in ascending order of the preset number.
NOTE
For detailed method for presetting a station, refer to "Presetting a station" on
Page
119 .
Setting the frequency
It is possible to set the frequency manually to listen to the radio.
1
Rotate the [MODE/TUNE] button in either direction.
• Turning the [MODE/TUNE] button counterclockwise lowers the
frequency and turning it clockwise heighten the frequency.
• For the FM radio, select (BAND) to make selection of the
BAND. Each time (BAND) is selected, a changeover is
made between FM1 and FM2.