Subaru 2009 Impreza Navigation System - Manual (Page 76)

76 Navigation
Stored Locations
4
Select (reduce) or (enlarge).
(reduce): Reduces the size of the avoid area.
(enlarge): Increases the size of the avoid area.
5
Select (OK).
NOTE
• Reduce the scale of the map to specify a larger area.
• Avoid areas can be set only when the scale of the map is 0.6 mile (1 km) or
less.
■
Reviewing and modifying avoid areas
Using this function, you can review the stored avoid areas in the form of
a list and modify them if necessary.
1
Press the button, then select (stored loca-
tions), and then select (avoid area).
2
Select (list).
3
Select the avoid area to be modified .
4
Select the key corresponding to the item to be modified.
For details regarding the function of each key, refer to "Reviewing
and modifying memory points" on Page
71 .
NOTE
The methods for deleting individual and all avoid areas are the same as those
described on Page
74 for memory points.