Subaru 2009 Impreza Navigation System - Manual (Page 33)

Navigation 33
Setting Route
■
"Memory Point" method
If you have saved some locations in the system's memory, you can
make use of an appropriate one to set the destination.
1
Press the button and select (memory
point).
2
Select the address of the desired location (memory
point).
: Use this key to display up to five previous suggestions.
: Use this key to display the previous suggestion.
: Use this key to display the next suggestion.
: Use this key to display up to five of the next suggestions.
3
Select (destination) or (waypoint).
NOTE
• Select the (Attribute), (icon), (name), or
(date) key to change the sequence in which memory points are
displayed.
• You cannot use the "Memory Point" method unless there are memory points
stored. To store memory points, See Page
70 .
■
"Home" method or method using stored destinations
If you have stored your home address in the system's memory, you can
use it for your destination or a waypoint. Similarly, if other locations are
stored in the memory, they can be conveniently used for quick setting
of destination and waypoints.
1
First, choose either of the two procedures below to fol-
low the "home" method.
Press the button.
2
Select (home) or one of the locations pro-
grammed to keys (Category 1)
through (Category 5).