Subaru 2005 Legacy - Manual (Page 176)

3-5
Instruments and controls
– CONTINUED –
! START
Do not turn the ignition switch to the “START”
position while the engine is running.
The engine is started in this position. The starter
cranks the engine to start it. When the key is released
(after the engine has started), the key automatically
returns to the “ON” position.
! For vehicle with immobilizer
If your registered key fails to start the engine, pull out
the key once (the security indicator light will blink), and
then insert the key in the ignition switch and turn it to
the “START” position to start the engine again.
NOTE
The engine may not start in the following cases:
" The key grip is touching another key or a metal-
lic key holder.
UB3209BA