Subaru 2005 Legacy User Manual

Page 576

Advertising
background image

11-77

Maintenance and service

– CONTINUED –

A) Rear turn signal light
B) Backup light
C) Brake/tail and rear side marker light

2. Remove the bulb holder from the rear combination

light assembly by turning it counterclockwise.

3. Remove the bulb from the socket by pushing it and

turning counterclockwise. Install a new bulb.

4. Set the bulb holder into the rear combination light

assembly and turn it clockwise until it locks.

5. Securely lock the cover against the trunk trim by

using the screwdriver to turn the top knob clockwise.

! Station wagon

1. Using a Phillips screwdriver, remove the upper and

lower screws.

A

B

C

UBB206BB

UBB533BA

Advertising
See also other documents in the category Subaru Cars: