Subaru 2005 Legacy - Manual (Page 352)

6-35
Interior equipment
– CONTINUED –
1. Locate the training button on the garage door open-
er motor head unit. The exact location and color of the
button may vary by brand of garage door opener. If it
is difficult to locate the training button, refer to your ga-
rage door opener’s instruction manual.
A) Training button
2. Press the training button on the garage door open-
er motor head unit (which activates the “training light”
on the unit). Proceed to step 3 within 30 seconds.
3. Inside the vehicle, firmly press and release the
HomeLink® button that was programmed in the sec-
tion above. Press and release the button a second
time to complete the programming procedure.
NOTE
Some garage door openers may require you to do
the above procedure a third time to complete the
programming.
UB6221BA
A
UB6222BB