Automatic transmission – 4 speed – Subaru 2005 Legacy User Manual

Page 371

Advertising
background image

7-16

Starting and operating

Automatic transmission – 4 speed

The automatic transmission is electronically controlled

and provides 4 forward speeds and 1 reverse speed.

Also, it has a manual mode and a SPORT mode.

Do not shift from the “P” or “N” position into

the “D” or “R” position while depressing the ac-

celerator pedal. This may cause the vehicle to

jump forward or backward.

"

Shift into the “P” or “R” position only after

the vehicle is completely stopped. Shifting

while the vehicle is moving may cause damage

to the transmission.
"

Do not race the engine for more than five sec-

onds in any position except the “N” or “P” po-

sition when the brake is set or when wheels are

used blocks. This may cause the automatic

transmission fluid to overheat.
"

Avoid shifting from one of the forward driving

positions into the “R” position or vice versa un-

til the vehicle has completely stopped. Such

shifting may cause damage to the transmis-

sion.

NOTE

Immediately after ATF (automatic transmission

fluid) is replaced, you may feel that the automatic

transmission operation is somewhat unusual.

This results from invalidation of data which the

on-board computer has collected and stored in

memory to allow the transmission to shift at the

most appropriate times for the current condition

of your vehicle. Optimized shifting will be restored

as the vehicle continues to be driven for a while.

Advertising