Subaru 2005 Legacy - Manual (Page 307)

5-52
Audio
" Press the “ ” or “ ” side of the SEEK/SCAN
button
"
Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
! Auto tuning (scan mode)
The scan mode lets you listen to the first 10 seconds
of each track/file (track) in succession. Press the “ ”
side of the SEEK/SCAN button for 1.5 second or long-
er to start scanning upward beginning with the track/
file (track) following the currently selected one. Press
the “ ” side of the button to start scanning down-
ward beginning with the track/file (track) preceding the
currently selected one. When all tracks/files (tracks) in
the disk/folder have been scanned, normal playback
will be resumed. To cancel the scan mode, press the
“ ” or “ ” side of the button for 1.5 second or long-
er.
NOTE
The scan mode will be cancelled if you perform
any of the following steps:
"
Press the “RPT” button
" Press the “ ” or “ ” side of the TUNE/
TRACK button
"
Press the “ ” or “ ” side of the SEEK/SCAN
button
"
Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
SEEK
SCAN
UB5212DA