Subaru 2005 Legacy User Manual
Page 350
6-33
Interior equipment
– CONTINUED –
hand-held transmitters for further programming or
device testing in the event of a problem.
"
It is recommended to insert a new battery in the
hand-held transmitter of a device to ensure cor-
rect programming.
!
Garage door opener programming in
the U.S.A.
NOTE
When programming the HomeLink® Wireless
Control System for a garage door opener, it is sug-
gested that you park the vehicle outside the ga-
rage.
1. Unplug the motor of the garage door opener from
the outlet.
2. Press and hold the two outside HomeLink® buttons
until the indicator light begins to flash (after 20 sec-
onds). Release both buttons.
NOTE
If any of the HomeLink® buttons are already pro-
grammed for other devices, skip step 2 because it
clears the memory of all the three buttons.
3. Hold the end of the garage door opener’s hand-
held transmitter between 1 and 3 inches (25 and 76
mm) away from the HomeLink® buttons on the driver’s
sun visor, keeping the indicator light in view.
UB6220BA