CIRCUTOR PowerStudio Series - Manual (Page 130)

PowerStudio PowerStudio
130 User Manual
Displays general information.
• Voltage transformation ratio: Primary and secondary voltage programming. The primary
voltage value should be between 1 and 999999 V and the secondary between 1 and 999 V.
The product of the primary value and the primary current must be the same as or less than
20,000,000.
• Current transformer primary: This is the device primary current value. Value may be
between 1 and 10000 A. The secondary current is 5A in the CVM-K HAR.
Use this selector to configure the type of distortion the device will calculate.
Should an additional module with two relay outputs be available, it can be configured as an
alarm mode with the THD or D variables on voltage and on current.