CIRCUTOR PowerStudio Series - Manual (Page 185)

PowerStudio
User Manual 185
For the configuration of digital inputs,
• Description: Alphanumeric type data which permits a brief description of the digital
input to be entered for better identification.
For the configuration of flows,
Checking the selector will activate the flow variable. Remember that if this selector is not
checked, it will not be possible to display the flow value of the corresponding LM25-M input.
• Description: Alphanumeric data used to enter a brief description of the flow for a
better identification.
• Unit: Alphanumeric data used to enter a brief description of the units in which the flow
will be displayed.
• Factor: Multiplier value of each input pulse.
• Time: Time in minutes for calculating the flow value.
• Calculation window: Time window, in seconds, that the software will use to calculate
an estimate of the flow, taking into account the value of the device meter.