CIRCUTOR PowerStudio Series - Manual (Page 16)

PowerStudio PowerStudio
16 User Manual
Displays general information about the device.
Displays the filter status, (ON/OFF); this field cannot be edited.
Displays the control algorithm, there are two options (Frequency method or Temporal method);
this field cannot be edited.
Displays the transformation ratio for the load current measurement transformer; this field
cannot be edited either.
Configuration of the operating mode; the four modes can be selected at the same time.
Option for selecting harmonics in the selective filtration.
Displays the minimum load current to start the filter.
Displays the number of AFQs installed in parallel; the value must be between 1 and 8,
inclusively.