CIRCUTOR PowerStudio Series - Manual (Page 180)

PowerStudio PowerStudio
180 User Manual
Finally for the flow configuration:
Checking the selector will activate the flow variable. Remember if the selector is not
checked it will not be possible to view the flow value of the corresponding LM-24 M input.
• Description: Alphanumeric type data which permits a brief description of the flow to
be entered for better identification.
• Unit: Alphanumeric type data which permits a brief description of the units where the
flow is shown to be entered.
• Factor: Multiplier value of each input pulse.
• Time: Time in minutes for calculating the flow value.
• Calculation window: Time window, in seconds, that the software will use to calculate
an estimate of the flow, taking into account the value of the device counter.