CIRCUTOR PowerStudio Series - Manual (Page 164)

PowerStudio PowerStudio
164 User Manual
It is possible to load a value into the
device's meters.
Allows you to send the PC date and time to
the EDS Embedded device.
1.42.1.2 Device inputs
Use to switch between the flow, digital inputs and outputs
configurations of the meters. The previous image shows the configuration of the meters.
it is possible to configure the following information for each of the eight meters:
 Description: Alphanumeric type data to identity the meter on the device display.
 Unit: Alphanumeric type datum to identify the meter units.
 Factor: Multiplier value which can be read on the meter.
The configuration of the flows will look as follows: