Dynex OPSYS MW 91000051 - Manual (Page 22)

Unpacking
To unpack the components:
1. Place the Opsys MW™ instrument in the position where it will be
located for use.
2. Place the Wash Container, Waste Container and Foam/Aerosol
Trap at the rear of the instrument.
3. Examine the packaging to be sure that the power cord and other
materials have been removed. Please save packaging material
for future use.
4. Verify that all of the materials listed above have been unpacked.
5. Inspect the components for damage. If damage is observed,
contact your shipper or service representative immediately.
14 Opsys MW™ User’s Guide