Dynex OPSYS MW 91000051 - Manual (Page 32)

The Keypad
The use of each of the keys is summarized below:
Key Purpose
Scroll keys The functionality of the scroll keys depends upon
what is being displayed.
During display of the main menu (page 26),
pressing the up or down scroll keys will display
successive wash protocol numbers and names (or
dashes, if a protocol is not yet named).
Horizontal scrolls will scroll through selections for
the selected menu. Repeatedly pressing the
horizontal scroll button will show the next two
items in a list. A list with one item will have a
blank entry.
If you are entering or editing information, a
scroll will move the cursor through edit fields.
When editing an existing plate or protocol name,
you may either type over the existing name, or
press the DEL key to delete the characters from
the existing name. (NOTE:To delete the entire
name, either type over it or press the right arrow
key and DEL to delete all characters to the right of
the cursor. The first character of an existing name
cannot be deleted, but it can be overwritten.)
Function keys Two function keys select the item or execute the
command shown directly above each key on the
second line of the display.
“Del” key When a modifiable entry is displayed, selecting
Delete will allow the entry to be modified. While
editing a field, selecting Delete removes the
character at the cursor location and all characters
to the right of the cursor.
“Enter” key Completes an entry of characters, accepts default
prompt data, and displays the next prompt in a
series of commands
“Start” key Starts a wash protocol. This can only be done
while the main menu is being displayed.
“Cancel” key Returns to the previous menu within the function
24 Opsys MW™ User’s Guide