Dynex OPSYS MW 91000051 - Manual (Page 92)

Returning a Washer for Service
EQUIPMENT IN TRANSIT
IMPORTANT: Please include a copy of this form with each instrument. If your
instrument contains a hard drive, please retain back-up copies of any stored files.
Failure to do so may result in the loss of those files
.
Return Authorization Number: ___________
Contact Technical Service, DYNEX Technologies
phone: (800) 288-2354 or (703)631-7800 ext. 1440
fax: (703) 631-7816
Equipment:
__________
Serial Number: _____________
__________________________________________________________________
EQUIPMENT DECLARATION
Clearly indicate fault condition or reason for return .
________________________________________________________
CERTIFICATE OF DECONTAMINATION
I certify that the equipment described above has been disinfected/decontaminated*
and is clean, dry and fit for transport.
Signed:
Title:
Date: _ ________________
(DYNEX Technologies reserves the right to refuse improperly cleaned equipment)
Shipping Address: DYNEX Technologies, Inc.
Attn.:
(Above return number)
14340 Sullyfield Circle
Chantilly, VA 20151-1683
*Suggested decontamination methods:
Readers- Wash all surfaces with a 10% Hypochlorite solution, Follow that with
a mild detergent solution.
Washers- Please follow the “Decontamination Procedure” found in the
back of the manual.
Figure 10. Equipment in Transit Form
84 Opsys MW™ User’s Guide