Dynex OPSYS MW 91000051 - Manual (Page 43)

Configuring the System
Displaying the Software Version
The VERSION command displays the software version that is currently
installed on the Opsys MW™ instrument:
1. Select SETUP (if needed). The display will read:
Select option
HEAD
PLATE
2. Scroll right to display the next selection:
Select option
VERSION CAL.
3. Select VERSION. The display will momentarily read:
Opsys MW. v1.0
Note: The software version that is displayed
will depend on the version installed in the
instrument.
Opsys MW™ User’s Guide 35