CRU RTX Secure 610-IR - Manual (Page 14)

RTX220 QR - Manual
Page 14
Admin Password
The Admin Password option allows you to change the password
for the administrator account, which is used to access and modify
the settings in the GUI. The default username is ‘admin’ and
the password is ‘1234’. To change the password, click on the
“Change admin password” check box. Then enter the old password
in the first field. Type the new password in the second and third
field and finally click the “Confirm” button at the bottom of the
page.
User Password
The User password option allows you to change the password
for the user account, which is used to view, but not modify the
settings in the GUI. The default username is ‘user’ and the
password is ‘1234’. To change the password, click on the
“Change user password” check box. Then enter the old password
in the first field. Type the new password in the second and third
field and finally click the “Confirm” button at the bottom of the
page.
8.5.4 Mail Settings
The RTX Secure can be configured to send email to up to 3
addresses when events, warnings, and errors occur. Contact your
IT administrator to set up an email address for the RTX Secure and
to input the proper SMTP settings.
8.5.5 Notification Settings
Notification Settings allows you to configure the Simple Network
Management Protocol (SNMP), Windows Messenger events, the
System Log server, Event Log filters, and enable or disable the
internal buzzer.
SNMP (Simple Network Management Protocol)
SNMP can be configured to send trap messages to up to three
different addresses on the network. To add an address, simply
enter the IP address of the receiving server or computer, then
click the “Confirm” button at the bottom of the page. Note: The
receiving server must be configured to receive SNMP messages.
For more information on SNMP, you may wish to consult the third
party website: www.systemdisc.com/snmp
Messenger
The RTX Secure can be configured to send instant messages to up
to 3 addresses when events, warnings, or errors occur.
Syslog Server (System Log Server)
The Syslog Server option allows configuration for error, warning,
and information reporting via a port on the server. Enter the server
IP under Server IP/hostname and the port used in the UDP Port
line (the default port is 514). The Facility can be changed between
“User”, “Kern”, and “Local1” through “Local7” using the dropdown
box. Select the check boxes for “Info”, “Error”, and “Warning” that
pertain to the information that you want to have reported.
Event Log Filter
The Event Log Filter allows you to display event messages. To
configure what types of messages are displayed, select the
check boxes for “Info”, “Error”, and “Warning” that pertain to the
information that you want to have reported. The options for Pop
Up Events will display those events as a pop-up notification in your