CRU RTX Secure 610-IR - Manual (Page 31)

RTX220 QR - Manual
Page 31
FOR OFFICE OR COMMERCIAL USE
16. Technical Specifications
Product
Models
RTX Secure 610-IR and RTX Secure 810-IR
RAID Levels Supported RAID 0, 1, 3, 5, 6, 0+1, 10, 30, 50, 60, & JBOD
Host Interfaces Dual Gigabit Ethernet
Data Interface Speeds Up to 200MB/s (network dependent)
Drive Types Supported 3.5-inch SATA (Serial-ATA) hard disk drives
Online Auto-Rebuild Yes
TrayFree Technology Yes
TrayFree Shock
Absorbing Bays
Yes
LED Indicators • Alarm Indicator
• Power Indicator
• Access Indicator
Security Separate key lock for each HDD (RTX Secure 610-IR only)
Controller Display LCD screen with yellow backlight/control panel
Operating System
Requirements
• Windows XP, Vista, Windows 7
• Mac OS X 10.2.6 or later
• Linux distributions using Kernel version 2.4 or above
Operating Temperature 50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity 5% to 95%, non-condensing
Power Switch 2 position: On / Off
Power Supply • Input: 100-240VAC
• Output: 220 Watts (4-bay model), 350 Watts (6-bay
and 8-bay models)
Cooling Fan Two 8cm Ball Bearing Fans
Compliance EMI Standard: FCC Part 15 Class A, CE
EMC Standard: EN55022, EN55024
FIPS: FIPS 140-2, FIPS PUB 197
External Case Material Aluminum alloy
Shipping Weights • RTX Secure 610-IR: 28 lbs. without drives,
40 lbs. with drives
• RTX Secure 810-IR: 33 lbs. without drives,
45 lbs. with drives
Dimensions 6.97” X 10.63” X 14.57” (177mm x 270mm x 370mm)
Technical Support We don’t expect anything to go wrong with your CRU
product. But if it does, Tech Support is standing by and
ready to help.
Contact us at www.cru-dataport.com/support . We also
offer phone support at (800) 260-9800.
RTX and TrayFree are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective own-
ers. © 2008, 2010 CRU Acquisitions Group, LLC.
Limited Product Warranty
CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workmanship for a period of
two years from the original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties,
including but not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-
infringement of third-party rights with respect to the documentation and hardware. No CRU dealer, agent, or employee
is authorized to make any modification, extension, or addition to this warranty. In no event will CRU or its suppliers be
liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, computer
malfunction, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of,
use of, or inability to use any CRU product or service, even if CRU has been advised of the possibility of such damages.
In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves the right to make
modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a home or commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the
problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.