CRU RTX Secure 610-IR - Manual (Page 27)

RTX220 QR - Manual
Page 27
Level Type Description
Info VD write through Cache policy of VD <name> has been set
as write-through
Info VD extend Size of VD <name> extends
Info VD attach LUN OK VD <name> has been LUN-attached
Info VD attach LUN fail Failed to attach LUN to VD <name>
Info VD detach LUN OK VD <name> has been detached
Info VD detach LUN fail Failed to detach LUN from bus <number>
SCSI ID <number>, LUN <number>
Info VD init started VD <name> starts initialization
Info VD init finished VD <name> completes initialization
Warning VD init failed Failed to complete initialization of VD
<name>
Info VD rebuild started VD <name> starts rebuilding
Info VD rebuild finished VD <name> completes rebuilding
Warning VD rebuild failed Failed to complete rebuild of VD <name>
Info VD migrate started VD <name> starts migration
Info VD migrate finished VD <name> completes migration
Error VD migrate failed Failed to complete migration of VD
<name>
Info VD scrub started Parity checking on VD <name> starts
Info VD scrub finished Parity checking on VD <name> completes
with <address> parity/data inconsistency
found
Info VD scrub aborted Parity checking on VD <name> stops with
<address> parity/data inconsistency found
Info RG migrate started RG <name> starts migration
Info RG migrate finished RG <name> completes migration
Info RG move started RG <name> starts move
Info RG move finished RG <name> completes move
Info VD move started VD <name> starts move
Info VD move finished VD <name> completes move
Error VD move failed Failed to complete move of VD <name>
Info RG activated RG <name> has been manually activated
Info RG deactivated RG <name> has been manually deacti-
vated
Info VD rewrite started Rewrite at LBA <address> of VD <name>
starts
Info VD rewrite finished Rewrite at LBA <address> of VD <name>
completes
Warning VD rewrite failed Rewrite at LBA <address> of VD <name>
failed
Warning RG degraded RG <name> is in degraded mode
Level Type Description
Warning VD degraded VD <name> is in degraded mode
Error RG failed RG <name> is failed
Error VD failed VD <name> is failed
Error VD IO fault I/O failure for stripe number <address> in
VD <name>
Warning Recoverable read error Recoverable read error occurred at LBA
<address> - <address> of VD <name>
Warning Recoverable write error Recoverable write error occurred at LBA
<address> - <address> of VD <name>
Error Unrecoverable read error Unrecoverable read error occurred at LBA
<address> - <address> of VD <name>
Error Unrecoverable write error Unrecoverable write error occurred at LBA
<address> - <address> of VD <name>
Error Config read rail Config read failed at LBA <address> - <ad-
dress> of PD <slot>
Error Config write fail Config write failed at LBA <address> - <ad-
dress> of PD <slot>
Error CV boot error adjust global Failed to change size of the global cache
Info CV boot global The global cache is OK
Error CV boot error reate global Failed to create the global cache
Info PD dedicated spare Assign PD <slot> to be dedicated spare
disk of RG <name>
Info PD global spare Assign PD <slot> to Global Spare Disks
Warning PD read error Read error occurred at LBA <address> -
<address> of PD <slot>
Warning PD write error Write error occurted at LBA <address> -
<address> of PD <slot>
Warning Scrub wrong parity The parity/data inconsistency is found at
LBA <address> - <address> when checking
parity on VD <name>
Warning Scrub data recovered The data at LBA <address> - <address>
is recovered when checking parity on VD
<name>
Info PD freed PD <slot> has been freed from RG <name>
Info RG imported Configuration of RG <name> has been
imported
Info RG restored Configuration of RG <name> has been
restored
Info VD restored Configuration of VD <name> has been
restored
Info PD scrub started PD <slot> starts disk scrubbing process
Info Disk scrub finished PD <slot> completed disk scrubbing
process
Info Large RG created A large RG <name> with <number> disks
included is created